sreeju4935
New Member
my 1983 CI bullet jerking in 4th gear 30 to 40 speed (crank 10kg ,clutch 4plate ) engine work all done recently
but other bullet with 10kg crank can ride smooth in 30 to 40 speed ....Speed seems low for forth gear , if it is ok in all the lower gears and ok in 4th above 40kph then clearly the rpm at which it is doing 30 to 40 is too low. Avoid riding low speed on 4th lugging would do harm to engine.
Sent from my RMX2170 using Tapatalk
every thing checked bro ... engine wrk all done recentlyCheck points,points capacitor,coil , ignition lead and plug
Sent from my POCO F1 using Tapatalk
I had heavy crank 4 gear electra and it use to lugg in the mentioned speeds in 4th gear. I never rode it below 40 in 4th.but other bullet with 10kg crank can ride smooth in 30 to 40 speed ....
but my bullet used to ride smoothly... and the jerking start like little and getting more and more now its like hell and i done engine rework but the jerking is there...I had heavy crank 4 gear electra and it use to lugg in the mentioned speeds in 4th gear. I never rode it below 40 in 4th.
Sent from my RMX2170 using Tapatalk
If everything checked and working fine,you might have to retard the ignition timing a little bit to improve the slow running -a good Bullet ustad will knowevery thing checked bro ... engine wrk all done recently
tryed that alsoIf everything checked and working fine,you might have to retard the ignition timing a little bit to improve the slow running -a good Bullet ustad will know
Sent from my POCO F1 using Tapatalk